1. Preparation, 2. 3. Processing, assembly, 4. 5. Sanding, painting, 6. Packaging, and 1. Traditional methods for composition of wood products usually include the following processes: material selection, cutting length, planing, longitudinal section, plane, puzzle, kit, planer, forming machine, etc. With the emergence of new processing equipment, the above process has been correspondingly simplified, but the basic principles will not change. Ingredients usually require the following machines: feed saw, planer, cutting and sawing, flat milling, planer, jigsaw, band saw, mold, etc. Quality control during the mixing process is also very important. The quality of the control point components is: the quality of the material (burrs, tears, dents, indentations, wormholes, decay, deformation, knots, etc.), water content, size, proportion, and quality markings, plastic puzzles, puzzle pressure, pressing time, method and amount of glue, size and direction of wood grain, nail retention force, and flatness. 2、 The production process of modern wood products is different from that of traditional Chinese furniture (including Ming and Qing furniture), and it strictly follows the drawings to ensure accuracy within the allowable range. Wood hates every sub process of processing wool into products made from the required size and shape. It should be noted that the manufacturing process involves punching, milling, cutting inclined surfaces, excavating drill bits, etc. It is necessary to ensure accuracy to ensure an accurate error range during the assembly process. There are more types of machines used for processing wood, and new equipment is endless. However advanced the mechanical equipment may be, it is inseparable from the basic five categories: sawing, drilling, carving and milling, sanding, and auxiliary ʱ？ Often specific equipment: various saws (single saw, double saw, precision 45 degree cutting, band saw, wire saw, etc.), drilling (varieties: bench drill, drilling, drilling group, vertical and horizontal dual purpose drilling, pneumatic drill, etc.), various milling machines, various sanding tools and machinery. In addition, many new types of automated computer-controlled machines have brought varying degrees of change to the manufacturing of modern technology in wooden products. Quality control in this area is important to ensure the following three main aspects: size, shape, wood quality, and detailed quality requirements. This will not be explained in detail. In addition, a large number of sanding and polishing processes require time and space. The special instructions for polishing allow for stripes and circular polishing marks. 3、 The small assembly process is a key process to ensure the quality of modern wood products. Due to the large volume of some products and the heavy weight of the overall components, tools, assembly units, personnel, etc. are used during the assembly process. There is a significant difference from traditional Chinese furniture. In order to ensure the accuracy and proficiency of assembly operations, each assembly line should be arranged reasonably. The basic process is to install the frame, reinstall the details, and then trim it to be unreasonable. Fourthly, all products of the sanding machine must be leveled and sanded before painting. Grinding and polishing require a large amount of time and space in the process. Special attention should be paid to two points: firstly, sand marks with stripes and circular patterns are not allowed; Secondly, all products should maintain complete corners and circular edges with some arcs. Polishing and painting are a cycle. 5、 Modern painted wood products are mainly produced through the United States
